ARCTIC Case Fan Hub - 10-fold PWM Fan Distributor with SATA Power - Black

I’ve built a few PCs over the years, but managing fan cables always felt like wrestling an octopus. Enter the ARCTIC Case Fan Hub—this little gadget turned my cable nightmare into a clean, organized dream.Why it’s awesome:First off, 10 fans on one hub?! My gaming rig has eight case fans and a CPU cooler, and this thing handles them all without breaking a sweat. Plugged it into a single PWM header on my motherboard, connected the SATA power (no worrying about overloading the board), and boom—all my fans sync up perfectly. No more guessing if one fan’s lagging or revving like a jet engine.The PWM control is clutch. My system stays whisper-quiet during light use but ramps up smoothly when I’m gaming. Before this, I had fans daisy-chained with splitters, and half of them wouldn’t respond to speed settings. Now, everything just works.Installation was stupid easy. The hub has a no-nonsense design with labeled ports, and the adhesive backing lets you stick it anywhere in your case (I slapped mine behind the motherboard tray). No clunky screws or zip ties needed. Plus, the SATA power means you’re not stealing precious molex connectors or relying on the motherboard’s limited juice.Real-world use:I’ve had this running 24/7 for a month, and it’s been flawless. Even with my mix of ARCTIC and Noctua fans, there’s zero weirdness—just consistent cooling. My temps dropped a few degrees too, probably because all the fans are finally running as intended.Small gripes?The hub itself isn’t tiny, so cramming it into a super compact case might be tricky. But in my mid-tower, it’s hidden and out of sight. Also, make sure your PSU has a spare SATA cable, but that’s hardly a dealbreaker.Verdict:If you’re tired of fan cable spaghetti or want precise control without buying a fancy motherboard, this hub is worth every penny. ARCTIC nailed it with the simplicity and reliability. My build looks cleaner, runs cooler, and I finally feel like I “adulted” my cable management.Buy it. Your sanity (and PC) will thank you.

I got two of these Arctic splitters to have the front fans as well as the fans on my AIO radiator run on one fan header a piece. Specifically for fans that have a very short wire to the fan connector (like the noctua NF-A12x25 Chromax), this allows for much cleaner cable management runs in many cases.Essentially, this splitter emulates PST functionality from Arctic's fans onto any fan that can run on voltage. The first female header (closest to the male header) in the chain returns the PWM fan speed to the motherboard, so make sure that header is plugged in if you wish to run the group of fans via PWM!My only real gripe (that's not worth taking stars for) is that this splitter is a 1 -> 4 splitter. It would be nice to see a 1 -> 3 splitter with maybe an extra 5 or 10mm between headers to make it easier to work with fans with short connector leads, while also allowing for an even cleaner wiring setup.For the cost I paid per connector ( ~$8), I would absolutely recommend them to anyone who wants to reduce cable clutter behind their motherboard tray, especially for front intake or most radiator fans!

With magnetic strips you can put on the back, it's just plug and play with a sata port. Makes it really easy to have a lot of case fans with a micro atx or other small boards.

Funciona correctamente, llevo varios meses y no me ha dado ningún problema, lo recomiendo.

Was extremely frustrated initially because there was zero PWM fan control when I first installed this hub. It was simply running all my fans at full speed. HOWEVER, I decided before I return it to try tweaking just about every setting possible in BIOS and ASUS Fan Xpert2+ software because other people clearly stated in reviews that it did work controlling their fans. Well I'm not sure exactly what setting eventually got it work, but it now does work correctly and allows me to control my fans from 10%-100%. So if it doesn't at first work for you, I would suggest going into BIOS and any fan control software your motherboard may come with before giving up entirely! Hope this helps someone out there who is ripping their hair out like I was!:)

works great, just plug and play: you're off with all your fans going

The Arctic Cooling 10 PWM Fan Hub is exactly what I needed. It was easy to install, ridiculously cheap, and does its job flawlessly. I'm running seven Arctic Cooling P12 Max fans in my case, and having them all controlled from a single hub makes tuning fan curves through the Fan Control app effortless.The build quality is solid, and it keeps cable management clean while ensuring consistent power delivery. If you need a reliable way to manage multiple fans without breaking the bank, this is an easy recommendation.

Makes cabling nice and neat